供应德国BASF PA66 A5

Ultramid?PA66 
A3X2G7, Ultramid A3X2G7 is a 35% glass fiber reinforced injection molding PA66 grade with improved flame retardance and enhanced long-termstability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding mechanical and electrical properties. 
\A3X3G5,25%Glass fibre reinforced injection moulding grade with improved flame retardance and enhanced long-term stability. Flameretardant based on red phosphorus; very high stiffness and strength; outstanding electrical properties.UL94-V0/3,2mm. 
A3X4G7, 
A3XZG5, Ultramid A3XZG5 is an impact-modified, 25% glass fiber reinforced injection molding PA66 grade with improved flame retardance. 
A3Z,Impact-modified and stabilized injection moulding grade for components and housing with good low temperature impact resistance. 
A3ZHP, Ultramid A3Z HP is an unreinforced, impact modified, heat stabilized, high flow PA66 injection molding grade. Ultramid A3ZHP offers a uniquecombination of maximum toughness and impact resistance with excellent high flow processability. 
A3ZHPUV, Ultramid A3Z HP UV is an impact modified PA66 containing heat and ultraviolet light stabilizers.Designed for maximum toughness at low temperatures, Ultramid A3Z HP UV offers a uniquecombination of impact performance and excellent processability. 
A3ZG6,Impact-modified, glass fiber reinforced injection moulding grade. 
A3ZM4. Impact-modified, stabilized injection molding grade for components (housings) with high impact strength, heat distortion resistance and low warpage. Used for wheel covers. 
A4H. High heat aging resistant, medium viscosity injection moulding grade for highly stressed parts such as bearing cages,gear-wheels, coil formers and cable connectors. 
A4. Ultramid A4 is a medium viscosity, extrusion PA66 grade. It conforms to FDA requirements of 21CFR 177.1500. 
A5. Ultramid? A5. PHYSICAL. ISO Test Method. Property Value. Moisture, %. 62. RHEOLOGICAL. ISO Test Method. Property Value. MECHANICAL. 
A5W. 
A3WC4. Electrically conductive grade reinforced with 20% carbon fibers. Used for machinery elements and housings with high stiffness and dimensional stability, low density and favorable frictional behavior (e.g. connecting rods). 
A38K. 
C3M6. 
C3M8. Mineral-reinforced and stabilized injection molding grade for machinery components such as crown gears and small parts with high impact strength and low warpage. 
KR4205. Stabilized injection molding grade with improved flame retardance (free from halogens and phosphorus) and high toughness. Used for electrically insulating parts such as contact carriers and push-on terminal strips. 
KR4281.注塑改性级，含40%矿物质增强改性的制品 
KR4650.特殊级，适合矿物质增强改性的工程制品